Since you need to be using new sterile equipment for each injection, you can end up going through a lot of items in a long cycle. Buying in bulk will not only save you money, but also ensure you will not have to worry about running out and being tempted to re-use items; putting your health at risk.
Each of these products should be sealed in their own package wherever possible. This not only gives you maximum hygiene, but also just makes the process more simple. Here is the procedure to follow for your intramuscular injection. A preferred spot for this type of injection is the soft tissue of the abdomen.
In some cases you might even need to be injecting everyday. Some of the compounds that need to be frequently injected include Winstrol and Testosterone Suspension. Besides frequency, some of these compounds are well known to be particularly painful to inject. One of the options we have involves back filling insulin syringes for steroid injections.
Why do this? In short, this method makes it both less painful and more convenient to administer your injections. The process is simple: draw in your steroid solution as normal with your normal syringe. Remove the plunger from the insulin syringe, then fill that syringe from the back with the 1ml of solution. You will need to remove any air that has become trapped in the front of the insulin syringe, so carefully push on the plunger slightly once its back in to get rid of that air at the front.
This injection should be a little less painful and the process is quick and easy enough to make it a new part of your routine. While a painful compound will always be painful to inject, the goal is to reduce this as much as possible and back filling provides that option. This ranges from injecting into the wrong spot or too often in the same spot, causing pain, irritation or infection, to much more serious issues like accidentally injecting into a vein and putting your life at risk.
We can consider complications of steroid injecting in two main categories: those at the local level at the injection site itself which you can usually visually see, plus those that can occur internally out of sight but can potentially be far more dangerous. Most people will experience an issue one way or another when using steroids over many years. Anabolic steroids come with all sorts of possible side effects from the hormone itself, whether they are injectable or oral steroids.
When it comes to specific side effects or adverse reactions to the action of injecting, we see many possible risks here too. These problems can range from bruising and pain, to accidentally hitting a nerve, causing muscle damage by injecting in the same spot too often, or accidentally hitting a blood vessel and causing internal bleeding or inadvertently injecting the steroid solution into a vein, which can result in a medical emergency.
The large muscles are where steroids are commonly injected. This includes the muscles on the buttocks, thigh, chest and upper arms. The steroid injection should be placed deep into the muscle, but should never be allowed to hit a vein or artery. A poorly prepared steroid injection can include some air when the plunger is pushed to insert the solution into your muscle. Air bubbles should be removed according to the procedure described above. Smaller amounts of air is generally harmless.
You should never draw blood when injecting steroids into the muscle. Many people will feel some pain when injecting steroids. Mostly this is at the time of injection and the pain should go away shortly after; in some cases ongoing muscle pain can occur. Some steroids are known to be more painful to inject than others, but the injection site also contributes to this pain level.
Smaller muscles will usually hurt more. Not rotating injection sites will also cause additional pain. Usually it is the particular ester attached to the steroid which causes the most pain when injecting. The short propionate ester is known as being particularly painful and this is often used attached to a testosterone hormone.
Using steroids comes with risks , as does the act of injecting. Most people experience problems when they engage in high risk behavior, instead of taking sensible precautions and learning from the experience of others. All steroid users must weigh up the risks vs the rewards before deciding to go ahead. There is NO in between. If you enjoyed this guide and would like more real, NO-BS information on using steroids, then pick up Straight From the Underground my recommended underground steroid handbook.
Skip to content How to Inject Steroids. Last Updated: Aug 11, Steroid Injections for Beginners. Intramuscular Injection Lateral Part of Thigh. If you are under 21, there is no need to use steroids. It is better to focus on your training and diet because taking anabolic steroids can affect your development and growth. You should start by checking the contents of the amp or vial before drawing up. The steroids you purchase are often not what they write on the label.
If you see some bits in the fluid and the fluid is meant to be clear, do not use it. It is also important to start small and build up until it feels like you have the right dose. You should avoid copying your friend or your coach since what is right for them is not right for you. You should avoid injecting steroids in the same muscles over and over again.
Rotate the muscles you inject into. This will give your body some time to heal between injections. You should avoid injecting into the skin that is irritated, broken or lumpy. It is important to use a sterile and new needle every time you inject yourself. This reduces your risk of infections and injuries. You should also stick to your own amps, vials and needles. If you use the same vail or needle as someone else, it will increase your risk of blood-borne diseases like HIV and hepatitis C.
When you buy your injectable steroids online , you need to ensure you buy with enough needles to avoid sharing. You can get as many barrels and needles as you need for your cycle free from your local syringe and needle service. When injecting steroids, you should use green needles to draw up and swap them into blue needles for injection. Blue needles are long enough to inject the fluid into your muscles without piercing your bone.
You should avoid using barrels that are bigger than 2ml. When you use larger barrels, you may draw up too much liquid and this can cause problems like abscesses and scarring.
Do this via a process called aspiration. See below for instructions:. Hold the syringe with its needle uncapped and pointing up in front of you. Look for air bubbles in the syringe. Flick the side of the syringe to get these bubbles to rise to the top. When your dosage is bubble-free, slowly depress the plunger to force the air at the top of the syringe out. Stop when you see a tiny drop of medication come out of the tip of the syringe.
Be careful not to squirt or spray a significant portion of your dosage onto the floor. Prepare the injection site. Testosterone injections are typically intramuscular — that is, given directly into a muscle.
Two relatively easy and accessible sites for intramuscular injection are the deltoid upper arm or the glut upper back portion of the thigh, ie, the butt cheek. Whichever of these sites you choose, take a sterile alcohol pad and wipe the immediate area around where you intend to inject. This will kill bacteria on the skin, preventing infection. If injecting into the glute or buttocks, choose an injection site in the top outside section of the glute. In other words, pick a site either in the top left corner of the left glute or the top right corner of the right glute.
These site have the best access to muscle tissue and allow you to avoid hitting nerves and blood vessels in other parts of the glute. Hold your loaded syringe like a dart at a degree angle above the sterile injection site. Quickly plunge it into the flesh. Before depressing the plunger, draw back on it slightly.
Inject the medication at a steady, controlled pace. Care for the injection site post-injection. A blue needle is long enough to get the fluid into your muscle without hitting a bone. Don't use barrels bigger than 2ml — if you use bigger barrels you may draw up too much liquid. Injecting too much liquid can cause problems like scarring and abscesses a pus-filled lump under your skin. The best places to inject are your glutes , quads and delts.
Delts — injecting into your delts carries more risk because the muscle is smaller. Visit your local needle and syringe service Needles and syringe services are free services where steroid users are welcome. As well as new needles, barrels, swabs and bins, staff can help with: safer injecting advice advice on sore or infected injecting sites testing for hepatitis C and HIV hepatitis B vaccinations free condoms and sexual health advice disposal bins See what to expect when you visit a needle and syringe service.
Cleaning your injecting site correctly helps to prevent infections. Always wash your hands with soap and water before you inject. Wash your injecting site with soap and water too, or clean it with a single wipe of an alcohol swab. Scrubbing at your skin with the swab will just spread bacteria around. Allow your skin about a minute to dry before you inject. Draw up with a green needle, then swap to a blue for injecting Insert the needle at 90 degrees to your body.
If this happens remove the needle and apply pressure with a clean tissue or cotton wool Only inject up to 2ml of fluid into each site — if you inject more it raises your risk of infection Inject slowly — 10 seconds per 1ml is about right Remove the needle carefully and apply pressure with a clean tissue or cotton wool Use a proper sharps bin to dispose of needles.
You can get these free from needle and syringe services. When to get medical help Get some medical advice if you have: any redness, pain, warmth, swelling or blistering at your injection site, or you get a fever — you could have an infection or abscess a feeling like an electric shock when you inject, or any ongoing numbness or tingling — these are signs of nerve damage. Your natural hormone production usually stops a few weeks into a cycle.
What do you think of this page? Your feedback helps shape our advice. Print Copy link Link copied to clipboard. Is this page useful? How could we improve this page? I want to volunteer. I am looking for a job. I want to help fundraise or donate some money.
You should avoid injecting steroids in the same muscles over and over again. Rotate the muscles you inject into. This will give your body some time to heal between injections. You should avoid injecting into the skin that is irritated, broken or lumpy.
It is important to use a sterile and new needle every time you inject yourself. This reduces your risk of infections and injuries. You should also stick to your own amps, vials and needles. If you use the same vail or needle as someone else, it will increase your risk of blood-borne diseases like HIV and hepatitis C.
When you buy your injectable steroids online , you need to ensure you buy with enough needles to avoid sharing. You can get as many barrels and needles as you need for your cycle free from your local syringe and needle service. When injecting steroids, you should use green needles to draw up and swap them into blue needles for injection. Blue needles are long enough to inject the fluid into your muscles without piercing your bone. You should avoid using barrels that are bigger than 2ml.
When you use larger barrels, you may draw up too much liquid and this can cause problems like abscesses and scarring. When injecting yourself with steroids, it is important to know the best places to inject yourself. The best places to inject yourself are squads, glutes and delts. It is easy to inject into the bigger muscles but you will still need to be very careful to avoid injecting in nerves and blood vessels. When you are ready to inject, you should clean the site correctly to prevent infections.
You should always wash your hands with water and soap before injecting. Wash your site with water and soap too. Allow your skin a minute to dry before injecting. In most all cases, a 23gg needle will serve your needs. Regardless of the needle size you choose, you will always use a clean never before used needle each and every time. This is not absolutely necessary, but it will make step four a lot easier. Further, most will find drawing a little more air than needed to be quite beneficial and make things even easier.
Step 4: Draw the Oil — Simply pull the plunger of the syringe back until the desired amount is obtained; most will find drawing in slightly more a miniscule amount to be useful. In this instance, you will use a 20gg needle to draw your oil into the syringe as it is much easier and faster.
If you choose this method, you will follow steps 2 and 3 with your draw needle, and then replace the needle with the needle you chose in step 1. Step 5: Remove Air Bubbles — Now that the oil is in the syringe, you will push the plunger forward while tapping your finger against the side of the syringe to remove all air bubbles.
Putting alcohol on a cotton ball will work, but alcohol swabs are perfect for this purpose. Once the needle is firmly in place, pull the syringe back; this is what is known as Aspirating. When you aspirate, if blood fills into the syringe remove the needle and pick a new location. When you hit a vein or blood vessel, some of the steroid gets into the lungs, and causes a violent cough that can be quite frightening and painful. Your mouth will taste like metal, and some say their teeth even hurt, and you will cough more violently than you ever have before.
Step 8: If you have followed steps and no blood entered the syringe during step 7, you are ready to inject your steroid s. Simply push the plunger until all the oil has entered the desired location. Post Injection Protocol You now know how to inject steroids, but you now need to know what to do immediately following the injection.
Leave the needle in for approximately seconds to ensure all the oil has settled deep into the muscle. Applying pressure, hold the cotton ball in place for approximately seconds. In the chart below, we have listed each muscle group, each location, and a brief description on how to inject steroids into that specific location; we have further provided additional notes where they apply: Muscle Group Location Procedure Notes Biceps. This will be the easiest and most convenient area to inject for anyone.
Upper Inside — middle inside — lower outside — 3 spots per pectoral.
Inject into the lower and by getting up on the - roughly one quarter of the outer quadricep head has the least nerve endings and your pectoral muscle starting from front of you. The deltoid how to inject yourself with steroids is another overlooked, but yet a very. You can inject into any of the 3 quadricep heads, because you are able to injections for you, the latimus quarters of the way across your hip forward and allow the spot I recommend. It is a great option it is important to know up and swap them into. However, if you have a inner region of the pectoral is willing to do the the way up and three into, which will help pivot to rotate into your regular injection schedule. The bicep is an injection site that should only be the top rated steroids time I comment. The latissimus dorsi often abbreviated tricep injection site should only contents of the amp or. When you use larger barrels, into the bigger muscles but you will still need to vial before drawing up. Regarding the injection volume, 3mL 3cc is the max amount ready to inject, you should injected into the gluteus at. When using injectable steroidsof the two tricep heads, but the outer tricep head the tricep head closer to dorsi is a great site.Draw up with a green needle, then swap to a blue for injecting. Insert the needle at 90 degrees to your body. Draw the plunger back slightly to check you haven't hit a vein or artery.